Athena Instruments Pvt. Ltd.

• Timer: digital 1 min –99 min adjustable Impulse: digital closed loop, open loop: 1s , 4s , 8s
• Programmable : 10 program set
• Piezoelectric frequency energy converter : Lead zirconate TITANIUM
• (PZT) pyro electric ceramics .
• Standard probe: Titanium Alloy material Diameter (probe):
• 3mm/6mm/ 10mm / 12mm.
• CE & ISO 9001: 2008 Certified
• Variable Amplitude Control
• Micro Based, processor, Digital Display with user prompts
• Full Function pulsar ON & OFF
• Laboratory Jack
• Sonicator, ultrasonic homogenizers,ultrasonic processor,ultrasonic cell crusher, ultrasonic cell disrupter

• Acommpany probe:Φ20
• Optional variable probe Φ25/28
• Crushing capacity 550-1200ml
• Duty ratio 0.1-99.%
• power 220/110± 5%
• N/W(KG):19.24 G/W:34.29
• Packing size:53.4*29.5*43.5CM

The Ultrasonic power supply converts 50/60 Hz to frequency electrical energy. This electrical energy is transmitted to the piezoelectric transducer within the converter, where it is changed to mechanical vibrations. The ultrasonic vibrations are intensified by the probe and focused at the tip where the atomization takes place. The liquid travels through the probe, and spreads out as a thin film on the atomizing surface. The oscillating tip disintegrates the liquid into micro-droplets, and ejects them to form a gentle, low velocity spray.

• From micro-liters to liters – continuous or intermittent
• Dispenses material with virtually no overspray
• Pressure-less atomization – low velocity mist
• Low cost atomization probe replacement
• Minimal atmospheric contamination
• Virtually uncloggable
• Programmable operation
• Multiple probe operation
• No heating / No temperature rise

• Increase of humidity level
• Coating non-woven fabric, paper, etc…
• Laboratory spray drying
• Injection moisture into a gas stream
• Applying minute amount of oil, fragrance or flavor onto a product
• Injecting small volume of reagents into a reactor

• Stable emulsions
• Emulsions which have optimum viscosity
• Emulsions which desirable particle size
• Thorough distribution of solid particles in a liquid medium(dispersion)or any system requiring high-intensity mixing. Results for those systems have been difficult to predict in advance with conventional equipment.

Emulsions and dispersions are often made with low-cost,propeller mixers,involving a time-consuming process and producing a low-quality product with large particle size. Other equipment used are colloid mills and piston homogenizers,which do produce a good emulsion,but with low throughput,high power requirements,high maintenance costs and perhaps undesirable heating effects. Equipment is also bulky and has a high initial capital cost. Today, Athena ultrasonic equipment,capable of being engineered to almost any capacity and for use in any liquid processing system,is available. Such equipment is being used by more and more drug and cosmetic manufacturers as an efficient,low-cost system for producing excellent emulsions and dispersions. The ATHENA Ultrasonic Homogenizers offer precision engineering with all the necessary features to create a total system for ultrasonic disruption. In biological applications, Probe Sonicator is often used to disrupt cell membranes and release cellular contents. Probe Sonicator is also used to fragment molecules of DNA. Probe Sonicator is commonly used in nanotechnology for evenly dispersing nanoparticles in liquids and for breaking down particles to nano size.

Other Details:

• Timer: digital 1 min –99 min adjustable Impulse: digital closed loop, open loop: 1s , 4s , 8s
• Programmable : 5/10 program set
• Temp Range : 10-80°C (Temp settable)
• Piezoelectric frequency energy converter : Lead zirconate TITANIUM
• (PZT) pyro electric ceramics .
• Standard probe: Titanium Alloy material Diameter (probe):
• 3mm/6mm/ 10mm / 12mm.
• Power Supply: AC 230, 50 Hz/60 Hz
• CE & ISO 9001: 2008 Certified
• Variable Amplitude Control
• Micro Based, processer, Digital Display with user prompts
• Full Function pulsar ON & OFF
• Laboratory Jack

The advantages of Athena Technology ultrasonic emulsification system:

• Simple,low-cost design Initial equipment costs area fraction(often one-fourth or one-fifth) of the outlay required for conventional equipment with similar output. Installation of a Clangsonic emulsification system often merely means the replacement of an existing unit without change of production methods.
• Low operating costs
• High efficiency because all the energy is developed and used right in the liquids,high operating efficiency results. High production rates are achieved with a fraction of the power needed for conventional mixing equipment.
• Low maintenance
• Faster emulsification

Specification:

Ultrasonic Sonicator (Indigenous):

Ultrasonic Homogenizers are recommended for homogenization and Analysis of laboratory samples that do not require traditional grinding or rotor-stator cutting techniques for processing. The ATHENA Ultrasonic Homogenizers offer precision engineering with all the necessary features to create a total system for ultrasonic disruption. In biological applications, Probe Sonicator is often used to disrupt cell membranes and release cellular contents. Probe Sonicator is also used to fragment molecules of DNA. Probe Sonicator is commonly used in nanotechnology for evenly dispersing nanoparticles in liquids and for breaking down particles to nano size.

Other Details:

• Timer: digital 1 min –99 min adjustable Impulse: digital closed loop, open loop: 1s , 4s , 8s
• Programmable : 10 program set
• Temp Range : 10-99°C (Temp settable)
• Piezoelectric frequency energy converter : Lead zirconate TITANIUM
• (PZT) pyro electric ceramics .
• Standard probe: Titanium Alloy material Diameter (probe):
• 3mm/6mm/ 10mm / 12mm.
• Power Supply: AC 230, 50 Hz/60 Hz
• CE & ISO 9001: 2008 Certified
• Variable Amplitude Control
• Micro Based, processer, Digital Display with user prompts
• Full Function pulsar ON & OFF
• Laboratory Jack
• Ultrasonic Power : 150 -750W ( Average )
• Ultrasonic Frequency : 20+2 Hz
• Processor Controller with time Operation in : Micro Processor based Programmable Timer Two digit display is provided for selecting On Off Time and Total time of Processing Cyclic Mode
• Probe Tips : Detachable type made of TITANIUM
• 3 mm Dia and 20 mm Dia
• Cyclic Mode on : Maximum on time 15 Seconds no
• clamping off time
• Ultrasonic Horn: Is made of TITANIUM
• Ultrasonic Generator Tuning : Is Housed in a separate
• box. It has auto facility & the required control Unit
• Standard Accessories : Stand for Ultrasonic Probe
• Sonicator & Jack type for sample Placement.
• Probe Sonicator (Advanced)

Main Features:

• Auto frequency chasing, avoiding adjustment
  liquid crystal display at peak value.
• Main Instruction, Convenient operation
• Display Temperature Control Checking and set
  over - hot protection on the samples
• Output Amplitude 0-100% adjustment
• Overload Protection, so that equipment can
  not be damaged
• 10 Operating Programs for application or
  reserve after refreshing.

Ultrasonic Probe Sonicator Athena Ultrasonic Processor (Probe Sonicator) Model ATP-120, ATP-150, ATP-250 & 500:

• Piezoelectric frequency energy converter : Lead zirconate TITANIUM
• (PZT) pyro electric ceramics .
• Standard probe: Titanium Alloy material Diameter (probe):
• 3mm/6mm/ 10mm / 12mm.
• CE & ISO 9001: 2008 Certified
• Variable Amplitude Control
• Micro Based, processer, Digital Display with user prompts
• Full Function pulsar ON & OFF
• Laboratory Jack

Ultrasonic Homogenizer:

Ultrasonic Homogenizers are recommended for homogenization and Analysis of laboratory samples that do not require traditional grinding or rotor-stator cutting techniques for processing. The ATHENA Ultrasonic Homogenizers offer precision engineering with all the necessary features to create a total system for ultrasonic disruption. In biological applications, Probe Sonicator is often used to disrupt cell membranes and release cellular contents. Probe Sonicator is also used to fragment molecules of DNA. Probe Sonicator is commonly used in nanotechnology for evenly dispersing nanoparticles in liquids and for breaking down particles to nano size.

Major Function:

• Auto-tuning and power control convenience for user.
• Timer control the total working time from 1min to 30min;
• Display the remaining time on countdown state.
• On/OFF impulse timer: make sure to deal with temperature sensitive sample. On and off can be choose to continue setting from 1s , 4s or 8s;
• Automatic amplitude compensation to make the amplitude not changed following the carrying.
• Menu operation , easy , direct type.
  5-10 Programable Setting
  Microprocessor based controlled operation

Technical parameters:

• Timer: digital 1 min –30 min adjustable Power adjustable: 20%--100%???Impulse: digital closed loop, open loop: 1s , 4s , 8s
• Piezoelectric frequency energy converter: Lead zirconate titanium (PZT) pyro electric ceramics .
• Standard probe: titanium alloy material Diameter (probe): 3mm,6mm,10mm,12mm.
• Power Supply: AC 230, 50 Hz/60 Hz

Athena Ultrasonic Processor (Probe Sonicator):

• Piezoelectric frequency energy converter : Lead zirconate TITANIUM
• (PZT) pyro electric ceramics .
• Standard probe: Titanium Alloy material Diameter (probe):
• 3mm/6mm/ 10mm / 12mm.
• CE & ISO 9001: 2008 Certified
• Variable Amplitude Control
• Micro Based, processer, Digital Display with user prompts
• Full Function pulsar ON & OFF
• Laboratory Jack

Ultrasonic Homogenizers are recommended for homogenization and Analysis of laboratory samples that do not require traditional grinding or rotor-stator cutting techniques for processing. The ATHENA Ultrasonic Homogenizers offer precision engineering with all the necessary features to create a total system for ultrasonic disruption. In biological applications, Probe Sonicator is often used to disrupt cell membranes and release cellular contents. Probe Sonicator is also used to fragment molecules of DNA. Probe Sonicator is commonly used in nanotechnology for evenly dispersing nanoparticles in liquids and for breaking down particles to nano size.

Major Function:

• Auto-tuning and power control convenience for user.
• Timer control the total working time from 1min to 99min;
• Set TEMP as per required
• Display the remaining time on countdown state.
• Digital Display with Microprocessor Control
• Programmable in 5 /10 USER Settings
• ON/OFF impulse timer: make sure to deal with temperature sensitive sample. On and off can be choose to continue setting from 1s , 4s or 8s;
• Automatic amplitude compensation to make the amplitude not changed following the carrying.
• Digital operation , easy , direct type.

Technical parameters:

• Timer: digital 1 min –90 min adjustable Power adjustable: 20%--100%, Impulse: digital closed loop, open loop: 1s, 4s, 8s
• Piezoelectric frequency energy converter: Lead zirconate TITANIUM(PZT) pyro electric ceramics.
• Standard probe: titanium alloy material Diameter (probe): 3mm /6mm /9-10mm /12mm.

Specifications:

Ultrasonic Processor:

• CE & ISO 9001: 2008 Certified
• Variable Amplitude Control
• Micro Based, processer, Digital Display with user prompts
• Full Function pulsar ON & OFF
• Laboratory Jack

Applications:

Prepare Tissue , Prepare Emulsions , Immiscible Liquids Accelerate Enzymatic Reactions , Accelerate Chemical Reactions , Stimulate Bacterial Activity Disperse Solids , Degassing of Liquids , De-agglomerate Powders Dissolve Powders, Dissolve Tablets , Emulsify Cosmetics Extract DNA / RNA , Extract Proteins , Emulsify Liposomes. SS Velocity Horn fitted with PZT Crystals (Transducer Elements) This velocity Horn Assembly converts the electrical frequency energy fed from the ultrasonic generator to mechanical vibrations at the rate of applied electrical frequency. The amplitude of these mechanical vibrations are magnified by this velocity Horn. This Velocity Horn is used for.. The Processing Applications.

Advantages:

Homogenization, Micro fined Emulsion *More stable compares to processes.Very flexible it can easily be transferred from one batch to other without intermediary operations like emptying, cleaning and refilling. Ultrasonic Processor can be transported to various locations of sample operations.

Specifications:

• Capacity : 25 – 900ml Probe Size : 6mm / 12mm / 20 mm
• Ultrasonic Power : 750 W Frequency (KHz): 20
• Timer : Cyclic ON / OFF ATP-500
• Capacity : 5 – 500ml Probe Size : 3mm / 6mm / 12mm
• Ultrasonic Power : 500 W Frequency (KHz): 20
• Timer : Cyclic ON / OFF ATP-250
• Capacity : 1 – 300ml Probe Size : 3mm / 6mm
• Ultrasonic Power : 250 W Frequency (KHz): 20
• Timer : Cyclic ON / OFF ATP-150
• Capacity : 0.1ml – 200ml Probe Size : 3mm / 6mm
• Ultrasonic Power : 150 W Frequency (KHz): 20
• Timer : Cyclic ON / OFF

Major Function:

Auto-tuning and power control convenience for user.Timer control the total working time from 1min to 99min;Set TEMP as per requiredDisplay the remaining time on countdown state.Digital Display with Microprocessor ControlProgrammable in 5 /10 USER SettingsON/OFF impulse timer: make sure to deal with temperature sensitive sample. On and off can be choose tocontinue setting from 1s , 4s or 8s;Automatic amplitude compensation to make the amplitude not changed following the carrying.Digital operation , easy , direct type.

• Piezoelectric frequency energy converter : Lead zirconate TITANIUM
• (PZT) pyro electric ceramics .
• Standard probe: Titanium Alloy material Diameter (probe):
• 3mm/6mm/ 10mm / 12mm.
• CE & ISO 9001: 2008 Certified
• Variable Amplitude Control
• Micro Based, processer, Digital Display with user prompts
• Full Function pulsar ON & OFF
• Laboratory Jack

Applications:

• Prepare Tissue , Prepare Emulsions , Immiscible Liquids
• Accelerate Enzymatic Reactions , Accelerate Chemical Reactions , Stimulate Bacterial Activity
• Disperse Solids , Degassing of Liquids , De-agglomerate Powders
• Dissolve Powders, Dissolve Tablets , Emulsify Cosmetics
• Extract DNA / RNA , Extract Proteins , Emulsify Liposomes.

• full amplitude control amplitude (intensity) is controlled from 1-100% giving a greater degree of resolution and the ability to pinpoint the amplitude needed to effectively process your sample.
• Pulse mode adjustable pulse on and off times to reduce the heat gain in temperature sensitive samples. Auto tuning the sonicator digitally tracks frequency changes in the converter/ tip assembly caused by load and temperature changes and maintain electrical efficiency at all times. Manual tuning is unnecessary. Temperature monitoringan optional temperature probe is available for those customers who wish to monitor the temperature of their sample. If the temperature limitis reached, sonication shuts down to prevent overheating

• Biological / biotech sonication is an ideal tool for lysing bacteria, yeast and tissue cells for the extraction of protein,dna, rna, and cellular components. Dna shearing (chip assay) is a very common application.
• Pharmaceutical cell disruption is common in analytical, quality control, and r & d labs to perform numerous functions from mixing and degassing of analytical samples, to cracking open tablets for dissolution tests. Liposomes and emulsions are easily formed by sonication for microencapsulation purposes in the production of creams and lotions.
• Chemical sonication accelerates both physical and chemical reactions, creating new fields of research. Major advances in sono chemistry include chemical synthesis of catalysts and new alloys, catalyzing organo-metallic reactions, micro-encapsulation of protein and hydrolyzing esters. The use of sonication provides greater yields, increases overall efficiency, and saves energy.
• Industrial industrial uses include forming emulsions, catalyzing reactions, extracting compounds, and reducing particle size.

• Timer: digital 1 min –99 min adjustable Impulse: digital closed loop, open loop: 1s , 4s , 8s
• Programmable : 5/10 program set
• Temp Range : 10-80°C (Temp settable)
• Piezoelectric frequency energy converter : Lead zirconate TITANIUM
• (PZT) pyro electric ceramics .
• Standard probe: Titanium Alloy material Diameter (probe):
• 3mm/6mm/ 10mm / 12mm.
• Power Supply: AC 230, 50 Hz/60 Hz
• CE & ISO 9001: 2008 Certified
• Variable Amplitude Control
• Micro Based, processor, Digital Display with user prompts
• Full Function pulsar ON & OFF
• Laboratory Jack

Ultrasonic Homogenizers are recommended for homogenization and Analysis of laboratory samples that do not require traditional grinding or rotor-stator cutting techniques for processing. The ATHENA Ultrasonic Homogenizers offer precision engineering with all the necessary features to create a total system for ultrasonic disruption. In biological applications, Probe Sonicator is often used to disrupt cell membranes and release cellular contents. Probe Sonicator is also used to fragment molecules of DNA. Probe Sonicator is commonly used in nanotechnology for evenly dispersing nanoparticles in liquids and for breaking down particles to nano size.

Other Details:

• Electrical Supply: 240 V, AC, 50 - 60 Hz, 1 Phase.
• Ultrasonic Supply: 150 Watts plus
• Ultrasonic Frequency: 20 plus / 33 KHz (plus or minus 3KHz.)
• Process Control: Micro-processor based Programmable timer with display is provided for selecting ON time, OFF time & Total Time of processor operation in Cyclic mode.
• Cyclic Mode: Maximum ON time 15 seconds, no clamping on OFF time.
• Processor Tips: Detachable type made of TITANIUM of 1mm & 2 mm Dia. nozzle
• Ultrasonic Horn: Is made of Titanium & is fitted with PZT Transducer.
• Ultrasonic Generator:Is housed in a separate cabinet. It has Auto-tuning & the control Panel is provided on the outer panel.
• Standard Accessories: Stand for Ultrasonic Atomizer & table Jack Type for sample placement
• Construction: Ultrasonic Processor Horn with Titanium is one part & Ultrasonic Generator is in a cabinet with all control switches & display.
• With 2 Nos. of flow inlet in opposite direction in the Titanium Tip.
• One PTFE Sleeve with air in annulus (i.e between sleeve & tip)