Athena Instruments Pvt. Ltd.

• Compact Size Tabletop Model.
• The gap between tank & Body well insulated with imported Glass wool Sheet.
• Water Jet Cutting & CNC fabrication.
• Best Quality powder coated.
• Digital Display.
• Specially Designed Silicon self Adhesive Heater fitted at the bottom side of the water tank
• Auto Cut off Sensor for process Timer, Heating & gas.
• Pneumatic Fitting Janatics & Parker Make are using.
• Pressure Gauge WIKA Make.
• Side Handles for easy to carry.
• Water tank, Test tube Rack & Nozzle Manifold Make SS 316
• Well, efficient & adjustable ventilation.
• Gas Path Transparent Non-Breakable Tubing.
• CE Certified & ISO 9001:2008
• Technology: Vortex Sharing Technology
• Controlled: Fully Microprocessor based
• Nitrogen Flow: Both side Nozzle flow for quick evaporation
• Auto Cut off Sensor for process Timer, Heating & gas.
• Temperature set-up / down arrow keys (1°C)
• Start/stop: Green LED indication when the process is On.
• Error indication: LED indication with Buzzer
• Certifications :ISO 9001 : 2008 & CE Certified
• Gas stations: 5 Nos. with LED indication, gas can be turned on each of independent manifolds when working with samples
• Heater: Internal heaters, adjustable from ambient to 95°C
• Digital LCD Display
• Automatic Control through microprocessor-based keypad for all gas stations.
• Pressure Settable
• TIME & TEMP LCD Display with microprocessor-based controlled
• Start and Stop LED Indication with Alarm
• Fully Automatic controller
• 100 sample Evaporator

• Compact Size Fit 2 Evaporator in 1 fume hood
• Precise manufacturing using latest technology -Water Jet Cutting & CNC fabrication
• High Quality Pressure Gauge from Wika.
• Side Handles for easy movement
• SS 316 tank & Nozzle Manifold for durability and maintenance free
• Best Quality powder coating for great looks & to avoid rusting
• Silicon Heater with SS316 Water bath Tank system
• Specially Designed for fast & uniform heating
• Tank & Body gap is well insulated with imported Glass wool Sheet to avoid heat loss.
• Digital LCD Display
• Auto Cut off with precision sensor for Time, temperature & gas flow
• Best quality Pneumatic Fitting from Janatics & Parker operation
• Efficient & adjustable ventilation with Built-in exhaust fan with blower
• 2mtr 1.5 ID Polyethylene Exhaust hose for easy ventilation
• 5 Nitrogen Control valves with ON/OFF Switches
• 50 nitrogen –dispending nozzle in five horizontal rows
• Self-glowing Power ON /OFF Switch
• Automated Solvent Drying, Solvent Evaporation

Nitrogen Evaporator:
AT-EV-50 Nitrogen Concentrator /Sample Evaporator (Turbo Athena Technology, Nitrogen Concentrator Model: AT-EV-50 is a Precision Sample Concentrator by Nitrogen Purging. It is a newly designed Sample Concentrator for multiple sample pre-concentration of in organic media. A Table Top Model. The unit can be set to a constant Flow and constant Temperature to ensure good evaporation. Also, the Nozzle height can be electrically set to the required level. It is fully microprocessor controlled and water bath, Temperature, gas station, more advantage LCD display, over Temp. Heater ON/OFF LED, door open display, high-temperature Thermal Coutour for safety for best quality and best performs.

Product Specifications:

• Vortex Shearing Concentration
• ASE (Dionex) Compatible upgrade Kit (For I-Chem vial 40mL, 60mL)

Time Range:
15 sec to 10 hours Time Set-up / down arrow keys (15 sec increments)
Temperature range: Ambient to 99°C (thermal cutout for safety)Temperature set-up / down arrow keys (1°C increment)
Start/stop: Green LED indication when process is On Display: LCD Digital Display Gas stations: 5 Nos. with LED indication
Gas regulator range: 0 to 100 PSI (approximate)Pressure gauge range: 0 to 100 PSI Controlled: Fully Microprocessor based Sample capacity: 50 Nos.Gas Line: 5 Nos.
Water tank capacity: 6.5 Ltr. (Not over flow)Dimensions: 30cm(H) x 40cm(W) x 55cm(L)Weight:20 Kgs (empty tank)
Colour: Athena Blue Exhaust: No fume hood required Power supply: 230 V AC / 3Amp
Error indication: LED indication with Buzzer

Technical Specifications:

• Space requirements: Tabletop or fume hood with minimum dimension L, W & H (cms) 70 x 50 x 65 table weight capacity 35 kg minimum requirement Work area: Flat, level, stable, surface Power supply: 230 AC/5amp single phase stable & well grounded Gas supply: Laboratory grade nitrogen Inlet pressure: 60 PSI minimum, 100 PSI maximum (And ON/OFF control valve)Exhaust: Exhaust duct outlet or fume hood - the exhaust duct must go outside the lab.Water bath capacity: 6.5 Ltr. distilled water (6.5 Ltr. do not overflow)

Rack Type Working volumes:

• 12mm x 75mm 04 ml
• 12mm x 100mm 05 ml
• 16mm x 100mm (Standard) 13 ml
• 15mm x 125mm 11 ml
• 15mm x 150mm 12 ml
• 17mm x 125 mm 15 ml
• 17mm x 150 mm 16 ml
• 18mm x 150mm 20 ml
• 20mm x 150mm 30 ml

• Precise manufacturing using latest technology -WaterJet Cutting & CNC fabrication
• High-Quality Pressure Gauge from Wika.
• Side Handles for easy movement
• SS 316 tank & Nozzle Manifold for durability and maintenance free
• Best Quality powder coating for great looks & to avoid rusting
• Silicon Heater with SS316 Water bath Tank system
• Specially Designed for fast & uniform heating
• Tank & Body gap is well insulated with imported Glasswool Sheet to avoid heat loss.
• Digital LCD Display
• Auto Cut off with precision sensor for Time, temperature & gas flow
• 5 Nitrogen Control valves with ON/OFF Switches
• 50 nitrogen –dispending nozzle in five horizontal rows

Leading Exporter:

Europe, Austria, Italy, Poland, Greece, Turkey, UAE, Qatar, Kuwait, USA, US, Malaysia, Thailand, Korea, Africa, Nigeria, UK, Ireland

• This evaporator is used for pharmaceutical biotech compounds, clinical samples, environmental samples, forensic and crime samples, drugs of abuse samples, food, and beverage analysis, etc. Using quality assured components and innovative technology in adherence to defined industry standards, this evaporator is perfectly manufactured under the stern supervision of our dexterous engineers.

• Turbovap II
• Optimum functionality
• Maintenance free
• Precisely designed
• Vortex Shearing Concentration
• Time Set-up / down arrow keys (15 sec increments)
• Temperature set-up / down arrow keys (1°C increment)
• Start/stop: Green LED indication when process is On
• Controlled: Fully Microprocessor based

• Athena Technology, Nitrogen Concentrator Model: AT-EV-08 is a Precision Sample Concentrator by Nitrogen Purging. It is a newly designed Sample Concentrator for multiple sample pre-concentration of in organic media. A Table Top Model. The unit can be set to a constant Flow and constant Temperature to ensure good evaporation. Also, the Nozzle height can be electrically set to the required level. It is fully microprocessor controlled and water bath, Temperature, gas station, more advantage LCD display, over Temp. Heater ON/OFF LED, door open display, high-temperature Thermal Coutour for safety for best quality and best performs.

Automated Evaporation Concentrator:

• Speedo Vap / Turbovap II An efficient automatic system for the concentration of samples which are extracted in organic solvents. Fast and economic concentration through efficient control of gas inlet Specially designed nozzle generates semi-helical air/gas flow to make more surface area and consequently helps faster concentration Two step control of gas introduction 5 independent timer settings for the gas inlet Simultaneous concentration of up to 8 samples at 2 different conditions(2 x 4) Diverse racks available for various sizes of sample containers

• Pharmaceutical biotech compounds
• Clinical samples
• Environmental samples
• Forensic and crime samples
• Drugs of abuse samples
• Food and beverage analysis
• Agrochemical samples

96 Well Plate Nitrogen Evaporator is a microprocessor-controlled evaporation system for simultaneous, automated and unattended concentration of multiple samples.

Features:

• 2 positions with individual gas regulation
• Compatible with 96-well standard or deep well plates
• Deep or shallow 96-well plates

The Athena Nitrogen Evaporator 96 Concentration Workstation is a high-speed concentrator designed to work with 96-well microplates and deep-well plates. It is an efficient alternative to the constant monitoring and long evaporation times that are characteristic of conventional techniques—with the added bonus of unattended operation. The evaporation process is patented gas-vortex action, further enhanced by a temperature controlled environment and adjustable gas flow rates. This combination saves time, bench space and operating costs while improving the evaporation speed and sample to sample consistency.

Applications:

The Nitrogen Evaporator 96 has two independent compartments that accommodate 1 mL or 2 mL standard or deep well plates. Each compartment has independent control of gas flow and temperature. The flow rate of the gas is determined by the volume of solvent in the plate and the temperature values can be set with the help of an evaporation guide supplied. Nozzles are easy to clean and require minimal maintenance. In genomic and proteomic applications, the evaporation of DMSO from plates is a common application. As is drying HPLC aqueous solvent mixtures of methanol or acetonitrile. The Nitrogen Evaporator 96 complements automated 96-well SPE workstations that are widely used for drugs of abuse determination and other pharmaceutical SPE methods.

• Vortex Shearing Concentration
• ASE (Dionex) Compatible upgrade Kit (For I-Chem vial 40mL, 60mL)
• Time Range: 15 sec to 10 hours
• Time Set-up / down arrow keys (15 sec increments)
• Temperature range: Ambient to 99 oC (thermal cutout for safety)
• Temperature set-up / down arrow keys (1 °C increment)
• Start/stop: Green LED indication when process is On
• Display: LCD (Digital)
• Gas stations: 5 Nos. with LED indication
• Gas regulator range: 0 to 100 PSI (approximate)
• Pressure gauge range: 0 to 100 PSI
• Controlled: Fully Microprocessor based
• Sample capacity: 50 Nos.
• Gas Line: 5 Nos.
• Water tank capacity: 6.5 Ltr. (Not over flow)
• Dimensions: 30cm(H) x 40cm(W) x 55cm(L)
• Weight:20 Kgs (empty tank)
• Colour: Grey
• Exhaust: No fume hood required
• Power supply: 230 V AC / 3Amp
• Error indication: LED indication with Buzzer

• Space requirements: Table top or fume hood with minimum dimension L, W & H (cms) 70 x 50 x 65 table weight capacity 35 kg minimum requirement
• Work area: Flat, level, stable, surface
• Power supply: 230 AC/5amp single phase stable & well grounded
• Gas supply: Laboratory grade nitrogen
• Inlet pressure: 60 PSI minimum, 100 PSI maximum (And ON/OFF control valve)
• Exhaust: Exhaust duct outlet or fume hood - the exhaust duct must go to outside the lab.
• Water bath capacity: 6.5 Ltr. distilled water (6.5 Ltr. do not over flow)

Nitrogen Evaporator
AT-EV-100 / AT-EV-50

Concentrating multiple samples by using nitrogen gas 100 samples (Make : Athena)

Specifications:

Technology : Vortex Sharing Technology

Display: LCD Digital Display for TIME & TEMP

Controlled: Fully Microprocessor based

Nitrogen Flow : Both side Nozzle flow for quick evaporation

Sample Capacity : 100 Nos. Gas Line: 5 Nos. & 50 Nos. Gas Line: 5 Nos.

* Auto Cut off Sensor for process Timer , Heating & gas.

Time Range : 15 sec to 10 hrs

Temperature range: Ambient to 95°C (thermal cutout for safety)

Temperature set-up / down arrow keys (1°C)

Start/stop: Green LED indication when process is On

Gas Pressure range: 0 to 100 PSI (approximate)

Water tank capacity: 10.5 Ltr. (Do not over flow)

Power supply: 230 V AC / 3Amp

Error indication: LED indication with Buzzer

Certifications :ISO 9001 : 2008 & CE Certified

Gas stations : 5 Nos. with LED indication, gas can be turn on each of independent manifolds when working with samples

Heater : Internal heaters, adjustable from ambient to 95°C

* Specially Designed Silicon self-Adhesive Heater fitted at the bottom side of the water tank.

* Pneumatic Fitting Janatics & Parker Make are using

* Water tank ,Test tube Rack & Nozzle Manifold Make SS 316

* Well efficient & adjustable ventilation.

* Gas Path Transparent Non Breakable Tubing.

Nitrogen Evaporator : A sample concentrator is a fast and convenient way of concentrating multiple samples at once.

Utilizing a simple gas delivery system the sample concentrator passes an inert/ N2 gas over the surface to samples via stainless steel needles. This in combination with the heat from the N2 gas puring below produces ideal conditions for fast, efficient evaporation.
Sample Concentrator

SPEEDOVAP HV NITROGEN EVAPORATOR & CONCENTRATION SYSTEM

100 Sample Nitrogen Evaporator
Design is Patent
100 sample Evaporator
Our deep knowledge and industrial expertise enable us to provide a distinguished range of 100 Sample Nitrogen Evaporator This evaporator is an automated high speed, small volume sample concentrator. It is specially designed for small sample volumes and large batches. It is ideal for sample volumes from 1 ml to 12 ml. We manufacture this evaporator using optimum class components and cutting-edge methodology as per the defined industry standards and norms.

Features:

• Anti-corrosive body
• Minimum maintenance
• High performance

Product Specifications:

• Time Set-up / down arrow keys (15 sec increments)
• Temperature range: Ambient to 95ºC (thermal cutout for safety)
• Temperature set-up / down arrow keys (1°C increment)
• Start/stop: Green LED indication when process is ON
• Gas stations: 5 Nos. with LED indication
• Display: LCD (Digital)
• Gas regulator range: 0 to 100 PSI (approx)
• Pressure gauge range: 0 to 100 PSI
• Controlled: Fully Microprocessor based
• Sample capacity: 100 Nos. (AT-EV-100)
• Exhaust: 1/2" Hose Pipe of 1 mtr. length
• Vortex Shearing Concentration

Other Details:

• Compact Size Tabletop Model.
• Precise manufacturing using latest technology -Water Jet Cutting & CNC fabrication
• High-Quality Pressure Gauge from Wika.
• Side Handles for easy movement
• SS 316 tank & Nozzle Manifold for durability and maintenance free
• Best Quality powder coating for great looks & to avoid rusting
• Specially Designed Aluminum block for fast & uniform heating
• No Bacterial fungal Growth, No cleaning required
• Tank & Body gap is well insulated with imported Glass wool Sheet to avoid heat loss.
• Digital LCD Display
• Auto Cut off with precision sensor for Time, temperature & gas flow
• Best quality Pneumatic Fitting from Janatics & Parker operation
• Efficient & adjustable ventilation with Built-in exhaust fan with blower
• 2mtr 1.5 ″ID Polyethylene Exhaust hose for easy ventilation
• 4mm Flexible Transparent gas Path Tubing
• Snap fitting 8mm OD Flexible Polyethylene Tubing for nitrogen supply
• 5 Nitrogen Control valves with ON/OFF Switches
• 50 nitrogen –dispending nozzle in five horizontal rows
• Self glowing Power ON /OFF Switch
• Automated Solvent Drying, Solvent Evaporation And Sample Concentration
• Evaporation Medium : Nitrogen & dry Heat (using block)
• Fast evaporation
• Microprocessor-controlled vortex motion increases surface area for faster evaporation.
• Maintenance-free, microprocessor-controlled motor provides smooth variable-speed ower to drive the vortex motion.
• Audible alarm with automatic shut down for timed end point
• Audible/visual alarm for end point detected by temperature sensors at heater and block..
• All mechanical components are isolated from the chemical fumes and vapors for longer life.
• Time Range: 15 sec to 10 hours
• Time Set-up / down arrow keys (15 sec increments)
• Temperature range: Ambient to 100 ºC (thermal cutout for safety)
• Temperature set-up / down arrow keys (1 °C increment)
• Start/stop : Green LED indication when process is On
• Gas stations : 5 Nos. with LED indication
  Gas regulator range : 0 to 100 PSI

• Nitrogen Evaporator 96 Model: AT-EV-96 Concentration Evaporator Workstation is a microprocessor-controlled evaporation system for simultaneous, automated concentration of multiple samples with the unattended operation, convenience and speed. It can accommodate one or two 96-well microplates or deep well plates. Microprocessor-controlled evaporation system designed for the simultaneous and automated concentration of multiple samples with the unattended operation, convenience and speed.

The 96 Deep or Shallow 96 Well Plates:

• The 96 has two independent compartments that can take 1 mL or 2 mL deep well plates and control the gas flow and electrical heating. A set of spacers supplied can raise the smaller 400 µL shallow plates to the correct height. The flow rate of the gas is determined by the volume of solvent in the plate and the temperature values can be set with the help of an evaporation guide supplied. The nozzle blocks can be easily cleaned if necessary as no other maintenance is required.

Key Applications:

• Genomic and proteomic applications that require concentration of purified extracts. The evaporation of DMSO solvent in plates is very common as well as HPLC solvent mixtures of Methanol or Acetonitrile with water. The 96 complements the Zephyr SPE workstation that is widely used for drugs of abuse concentration of the eluant and other pharmaceutical SPE methods.

96 Well, Plate Nitrogen Evaporator:

• Nitrogen Concentrator Model: AT-EV-96 is a Precision Sample Concentrator by Nitrogen Purging. It is a newly designed Sample Concentrator for multiple sample pre-concentration of in organic media. A Table Top Model. The unit can be set to a constant Flow and constant Temperature to ensure good evaporation.
• Also, the Nozzle height can be electrically set to the required level.
• We have introduced Nitrogen Evaporators for sample evaporation from Well plates. This system can be used for evaporation of sample from single Standard or Deep Well Plates.
• This system specifically suits the CRO and Bio-analytical Industry, allowing seamless process through Extraction, Evaporation, and Analysis

Features:

• Unattended operation for evaporation of 96 samples
• Dry heating up to 80°C
• Built-in nitrogen regulator
• LED displays for better visibility, if used under fume hood
• Observation window for accurate placing of nozzle and evaporation process
• Convenient size—no hood space required
• Exhaust open to atmosphere or within Fume Hood

Applications:

• Nitrogen Evaporator 96 plate has two independent compartments that accommodate 1 mL or 2 mL standard or deep well plates. Each compartment has independent control of gas flow and temperature.
• The flow rate of the gas is determined by the volume of solvent in the plate and the temperature values can be set with the help of an evaporation guide supplied. Nozzles are easy to clean and require minimal maintenance.

Introduction:

• Dry Solvent Evaporator Advance Dry Block Nitrogen Sample Evaporator for 50 Samples each of maximum 30 ml volume with timer microprocessor controlled Dry Block with adjustable temp. as well as the timer for purging Nitrogen Gas with individually controlled sample concentration & pressure gauge. It is fully microprocessor controlled and Nitrogen Dry Heat, Temperature, gas station, more advantage LCD display, over Temp. Heater ON/OFF LED, door open display, high-temperature Thermal Contour for safety for best quality and best performs. Athena Nitrogen Evaporator - Evaporation Systems are multiple-sample evaporators that use a combination of gentle forces — vortex motion and dry heat with nitrogen blow down — to quickly reduce samples to dryness or an endpoint volume. Athena Nitrogen Evaporator Vertex Dry Evaporators use dry heat and nitrogen blow down to speed evaporation of up to 50 small samples at once. Unlike water bath heaters, dry block heaters require less maintenance, no distilled water or additives, and adds no potential source of contamination. Compact Size Tabletop Model.

Features:

• Precise manufacturing using latest technology -Water Jet Cutting & CNC fabrication
• High-Quality Pressure Gauge from Wika.
• Side Handles for easy movement
• SS 316 tank & Nozzle Manifold for durability and maintenance free
• Best Quality powder coating for great looks & to avoid rusting
• Dry Block Heating, No Water required
• 600 W dry block heating system
• Specially Designed Aluminum block for fast & uniform heating
• No Bacterial fungal Growth, No cleaning required
• Tank & Body gap is well insulated with imported Glass wool Sheet to avoid heat loss.
• Digital LCD Display
• Auto Cut off with precision sensor for Time, temperature & gas flow
• Best quality Pneumatic Fitting from Janatics & Parker operation
• Efficient & adjustable ventilation with Built-in exhaust fan with blower
• 2mtr 1.5 ″ID Polyethylene Exhaust hose for easy ventilation
• 4mm Flexible Transparent gas Path Tubing
• Snap fitting 8mm OD Flexible Polyethylene Tubing for nitrogen supply
• 5 Nitrogen Control valves with ON/OFF Switches
• 50 nitrogen –dispending nozzle in five horizontal rows
• Self-glowing Power ON /OFF Switch
• Automated Solvent Drying, Solvent Evaporation, And Sample Concentration
• EvaporationMedium: Nitrogen & dry Heat (using block)
• Fast evaporation
• Microprocessor-controlled vortex motion increases surface area for faster evaporation.
• Maintenance-free, microprocessor-controlled motor provides smooth variable-speed power to drive the vortex motion.
• Audible alarm with automatic shut down for timed endpoint
• Audible/visual alarm for end point detected by temperature sensors at heater and block.
• All mechanical components are isolated from the chemical fumes and vapors for longer life.
• Time Set-up / down arrow keys: 15 sec increments
• Temperature set-up / down arrow keys (1 °C increment)
• Start/stop: Green LED indication when process is On
• Controlled: Fully Microprocessor based
• Easy ON/OFF switches to turn Nitrogen Flow on or off to the nozzle above the sample vials

• Compact Size Tabletop Model.
• Precise manufacturing using latest technology -Water Jet Cutting & CNC fabrication
• High-Quality Pressure Gauge from Wika.
• Side Handles for easy movement
• SS 316 tank & Nozzle Manifold for durability and maintenance free
• Best Quality powder coating for great looks & to avoid rusting
• Dry Block Heating, No Water required
• 600-watt dry block heating system
• Time Set-up / down arrow keys (15 sec increments)
• Temperature set-up / down arrow keys (1 °C increment)
• Start/ stop: Green LED indication when process is On
• Specially Designed Aluminum block for fast & uniform heating
• No Bacterial fungal Growth, No cleaning required
• Tank & Body gap is well insulated with imported Glass wool Sheet to avoid heat loss.
• Digital LCD Display
• Auto Cut off with precision sensor for Time, temperature & gas flow
• Best quality Pneumatic Fitting from Janatics & Parker operation
• Efficient & adjustable ventilation with Built-in exhaust fan with blower
• 2mtr 1.5 ″ID Polyethylene Exhaust hose for easy ventilation
• 4mm Flexible Transparent gas Path Tubing
• Snap fitting 8mm OD Flexible Polyethylene Tubing for nitrogen supply
• 5 Nitrogen Control valves with ON/OFF Switches
• 50 nitrogen –dispending nozzle in five horizontal rows
• Self-glowing Power ON /OFF Switch
• Automated Solvent Drying, Solvent Evaporation, And Sample Concentration
• Evaporation Medium: Nitrogen & dry Heat (using block)
• Fast evaporation
• Microprocessor-controlled vortex motion increases surface area for faster evaporation.
• Maintenance-free, microprocessor-controlled motor provides smooth variable-speed power to drive the vortex motion.
• Audible alarm with automatic shut down for timed endpoint
• Audible/visual alarm for end point detected by temperature sensors at heater and block.
• All mechanical components are isolated from the chemical fumes and vapors for longer life.

• Concentrating multiple samples by using nitrogen gas 24samples
• Technology: Gas vortex purging technology
• No. of Samples: 24 samples
• Gas control: Control of gas can be turned on to each of five independent manifolds when working with fifty samples.
• Timer range: 1 min to 99 min – 0.1 h to 9.9 h
• Tube Capacity: 24 test tubes
• Volume Range: 40 and 60 ml I chem vials
• Water Bath Capacity and Temperature: Capacity 6.5 ltrs Ambient to 99°C- Temperature (thermal cutout for safety)
• Gas supply requirement: Minimum 60 psi -Maximum inlet pressure and 100 psi.
• Exhaust: venting exhaust with hose pipe
• Electrical Supply: 220-240 V / 110V, 60 Hzs
• Certifications: ISO 9001: 2008 & CE Certified
• Warranty: The instrument have standard warranty of minimum ONE year
• Sample Capacity: 24 Nos. Gas Line: 3 Nos.
• Gas stations: 3 Nos. with LED indication, gas can be turn on each of independent manifolds when working with samples
• Heater: Internal heaters, adjustable from ambient to 99°C
• Water Bath Temperature range: Ambient to 99°C (thermal cutout for safety)
• Error Indication: LED indication with Buzzer

• Compact Size Table top Model.
• The gap between tank & Body well insulated with imported Glass wool Sheet.
• Water Jet Cutting & CNC fabrication.
• Best Quality powder coated.
• Digital Display.
• Specially Designed Silicon self Adhesive Heater fitted at the bottom side of the water tank .
• Auto Cut off Sensor for process Timer , Heating & gas.
• Pneumatic Fitting Janatics & Parker Make are using .
• Pressure Gauge Wika Make.
• Side Handles for easy to carry.
• Water tank ,Test tube Rack & Nozzle Manifold Make SS 316
• Well efficient & adjustable ventilation.
• Gas Path Transparent Non Breakable Tubing.

• UK, USA, Europe, Malaysia, Singapore, Thailand, Lanka, Jordan, Africa, Portugal, Taiwan, Australia, Newzealand

• Precise manufacturing using latest technology -WaterJet Cutting & CNC fabrication
• High Quality Pressure Gauge from Wika.
• Side Handles for easy movement
• SS 316 tank & Nozzle Manifold for durability andmaintenance free
• Best Quality powder coating for great looks & to avoidrusting
• Silicon Heater with SS316 Water bath Tank system
• Specially Designed for fast & uniform heating
• Tank & Body gap is well insulated with imported Glasswool Sheet to avoid heat loss.
• Digital LCD Display
• Auto Cut off with precision sensor for Time,temperature & gas flow
• Best quality Pneumatic Fitting from Janatics& Parkeroperation
• Efficient & adjustable ventilation with Built-in exhaustfan with blower
• 2mtr 1.5 ?ID Polyethylene Exhaust hose for easyventilation
• 5 Nitrogen Control valves with ON/OFF Switches
• 50 nitrogen –dispending nozzle in five horizontal rows
• Self glowing Power ON /OFF Switch
• Automated Solvent Drying, Solvent Evaporation

• Compact Size Table top Model.
• The gap between tank & Body well insulated with imported Glass wool Sheet.
• Water Jet Cutting & CNC fabrication.
• Best Quality powder coated.
• Digital Display.
• Specially Designed Silicon self-Adhesive Heater fitted at the bottom side of the water tank .
• Auto Cut off Sensor for process Timer , Heating & gas.
• Pneumatic Fitting Janatics & Parker Make are using.
• Pressure Gauge Wika Make.
• Side Handles for easy to carry.
• Water tank , Test tube Rack & Nozzle Manifold Make SS 316
• Well efficient & adjustable ventilation.
• Gas Path Transparent Non Breakable Tubing.
• Technology : Vortex Sharing Technology
• Display: LCD Digital Display for TIME & TEMP
• Controlled: Fully Microprocessor based
• Sample capacity : 50 Nos. Gas Line: 5 Nos.
• Auto Cut off Sensor for process Timer , Heating & gas.
• Time Range : 15 sec to 10 hrs
• Temperature range: Ambient to 99°C (thermal cutout for safety)
• Temperature set-up / down arrow keys (1°C)
• Start/stop: Green LED indication when process is On
• Gas stations: 5 Nos. with LED indication
• Gas Pressure range: 0 to 100 PSI (approximate)
• Water tank capacity: 6.5 Ltr. (Not over flow)
• Power supply: 230 V AC / 3Amp
• Error indication: LED indication with Buzzer
• Certifications :ISO 9001 : 2008 & CE Certified
• Gas stations : 5 Nos. with LED indication, gas can be turn on each of independent manifolds when working with samples
• Heater : Internal heaters, adjustable from ambient to 99°C
• Speedovap Hv Nitrogen Evaporator & Concentration System

• Precise manufacturing using latest technology -WaterJet Cutting & CNC fabrication
• High Quality Pressure Gauge from Wika.
• Side Handles for easy movement
• SS 316 tank & Nozzle Manifold for durability and maintenance free
• Best Quality powder coating for great looks & to avoid rusting
• Silicon Heater with SS316 Water bath Tank system
• Specially Designed for fast & uniform heating
• Tank & Body gap is well insulated with imported Glasswool Sheet to avoid heat loss.
• Digital LCD Display
• Auto Cut off with precision sensor for Time,temperature & gas flow
• Best quality Pneumatic Fitting from Janatics & Parkeroperation
• Efficient & adjustable ventilation with Built-in exhaust fan with blower
• 2mtr 1.5 ?ID Polyethylene Exhaust hose for easy ventilation
• 5 Nitrogen Control valves with ON/OFF Switches
• 50 nitrogen –dispending nozzle in five horizontal rows
• Self glowing Power ON /OFF Switch
• Automated Solvent Drying, Solvent Evaporation

• Best Quality powder coating for great looks & to avoid rusting
• Dry Block Heating , No Water required
• 600 watt dry block heating system
• Specially Designed Aluminum block for fast & uniform heating
• No Bacterial fungal Growth, No cleaning required
• Tank & Body gap is well insulated with imported Glass wool Sheet to avoid heat loss.
• Digital LCD Display
• Auto Cut off with precision sensor for Time, temperature & gas flow
• Best quality Pneumatic Fitting from Janatics & Parker operation
• Export to Egypt, Saudi Arebia, Iran, Iraq, Italy, Spain, Germany, UK, USA, Canada, Brazil, Argentina, Colombia, Malaysia, THailand, Korea, Kenya, Nigeria, Poland, Greece, Turkey, Africa, Russia, UAE, Dubai, Yemen, Israel, Slovakia, Hungry

• Time Set-up / down arrow keys (15 sec increments)
• Temperature set-up / down arrow keys (1°C increment)
• Start/stop: Green LED indication when process is On
• Gas stations: 5 Nos. with LED indication
• Gas regulator range: 0 to 100 PSI (approximate)
• Pressure gauge range: 0 to 100 PSI
• Controlled: Fully Microprocessor based
• Speedo Vap, Nitrogen Evaporator, Turbovap LV

• Vortex Shearing Concentration
• ASE (Dionex) Compatible upgrade Kit (For I-Chem vial 40mL, 60mL)
• Digital LCD Display

Automated Evaporation Concentrator

• Compact Size Table top Model.
• The gap between tank & Body well insulated with imported Glass wool Sheet.
• Water Jet Cutting & CNC fabrication.
• Best Quality powder coated.
• Digital Display.
• Specially Designed Silicon self-Adhesive Heater fitted at the bottom side of the water tank .
• Auto Cut off Sensor for process Timer , Heating & gas.
• Pneumatic Fitting Janatics & Parker Make are using.
• Pressure Gauge Wika Make.
• Side Handles for easy to carry.
• Water tank , Test tube Rack & Nozzle Manifold Make SS 316
• Well efficient & adjustable ventilation.
• Gas Path Transparent Non Breakable Tubing.
• CE Certified

• Pharmaceutical biotech compounds
• Clinical samples
• Environmental samples
• Forensic and crime samples
• Drugs of abuse samples
• Food and beverage analysis
• Agrochemical samples

Automated Evaporation Concentrator:

• Vortex Shearing Concentration
• Time Set-up / down arrow keys (15 sec increments)
• Temperature set-up / down arrow keys (1°C increment)
• Start/stop: Green LED indication when process is On
• Controlled: Fully Microprocessor based
• Exhaust: No fume hood required

• Time Range: 15 sec to 10 hours
• Time Set-up / down arrow keys (15 sec increments)
• Temperature range: Ambient to 99°C (thermal cutout for safety)
• Temperature set-up / down arrow keys (1°C increment)
• Start/stop: Green LED indication when process is On
• Display: LCD (Digital Display)
• Gas stations: 5 Nos. with LED indication
• Gas regulator range: 0 to 100 PSI (approximate)
• Pressure gauge range: 0 to 100 PSI
• Controlled: Fully Microprocessor based
• CE Certified
• Sample capacity: 50 Nos.
• Gas Line: 5 Nos.
• Water tank capacity: 6.5 Ltr. (Not over flow)
• Dimensions: 30cm(H) x 40cm(W) x 55cm(L)
• Weight:20 Kgs (empty tank)
• Colour: Athena Blue
• Exhaust: No fume hood required
• Power supply: 230 V AC / 3Amp
• Error indication: LED indication with Buzzer

• Space requirements: Table top or fume hood with minimum dimension L, W & H (cms) 70 x 50 x 65 table weight capacity 35 kg minimum requirement
• Work area: Flat, level, stable, surface
• Power supply: 230 AC/5amp single phase stable & well grounded
• Gas supply: Laboratory grade nitrogen
• Inlet pressure: 60 PSI minimum, 100 PSI maximum (And ON/OFF control valve)
• Exhaust: Exhaust duct outlet or fume hood - the exhaust duct must go to outside the lab.
• Water bath capacity: 6.5 Ltr. distilled water (6.5 Ltr. do not over flow)

Automated Solvent Drying, Solvent Evaporation And Sample Concentration Dry Evaporator Automated Drying And Concentration System Nitrogen Concentrator Blow Down Evaporator (dry Type):

• The Technology Dry type Concentrator System automates the drying, evaporation, and concentration of organic extracts prior to chromatographic analysis, combining what were once manual steps into one automated process. Unattended operation frees up laboratory personnel for other tasks and eliminates variability between chemists' techniques, producing superior and consistent results. When equipped with the Dry type Separation Membrane option, the Dry type Concentrator System can dry and concentrate samples in under 30 minutes -- increasing the sample throughput of your lab. For environmental applications the Dry Evaporator Concentrator System dries and concentrates organic extracts prior to GC and GC/MS analysis. The Concentrator System uses a unique combination of vacuum, heat, and nitrogen spurge gas to rapidly evaporate and gently concentrate extracts down to a precise desired volume. For Biopharmaceutical, pharmaceutical, and other applications the Dry Evaporator Concentrator System removes residual solvents from your compound in far less time than traditional evaporation methods. Through the precise application of vacuum, heat and nitrogen spurge gas, The Dry Evaporator Concentrator System gently and predictably evaporates all residual solvent from your compound so you can quickly move on to the next step.
• Compact Size Table top Model.
• Precise manufacturing using latest technology -Water Jet Cutting CNC fabrication
• High Quality Pressure Gauge from Wika.
• Side Handles for easy movement
• SS 316 tank Nozzle Manifold for durability and maintenance free
• Best Quality powder coating for great looks to avoid rusting
• Dry Block Heating , No Water required
• 600 watt dry block heating system
• Specially Designed Aluminum block for fast uniform heating
• No Bacterial fungal Growth, No cleaning required
• Tank Body gap is well insulated with imported Glass wool Sheet to avoid heat loss.
• Digital LCD Display
• Auto Cut off with precision sensor for Time, temperature gas flow
• Best quality Pneumatic Fitting from Janatics Parker operation

Export:

• To Egypt, Saudi Arebia, Iran, Iraq, Italy, Spain, Germany, UK, USA, Canada, Brazil, Argentina, Colombia, Malaysia, THailand, Korea, Kenya, Nigeria, Poland, Greece, Turkey, Africa, Russia, UAE, Dubai, Yemen, Israel, Slovakia, Hungry