Athena Instruments Pvt. Ltd.

• USB Interface(Except AT-FP640)
• LPG as burning gas
• Direct concentration read-out(Except AT-FP640)
• Measuring range adjustable
• 7 inch LCD touch screen
• Automatic Calculation of correlation coefficient(Except AT-FP640)
• Pre-selection of flame sizes
• Flameout protection device
• Optional built-in printer(Except for AT-FP640)

AT- GC 01 gas chromatograph can realize full EPC electronic flow control, realize full computer control of the instrument, and can be equipped with a high-precision liquid automatic sampler. It can be widely used in many fields such as petroleum, chemical industry, environmental protection, food safety, disease control, education and scientific research, and can analyze the macro, micro and trace amounts of organic matter, inorganic matter and gas.

• Vertical Autoclave widely used in Microbiology, Medicine, Waste

treatment, Pharma QC / QA / R & D and all applications requiring

sterilization.

• Double walled construction with Inner chamber (boiler) made of

Stainless Steel 16 SWG sheet – 304 grade and Outer shell of Stainless

Steel sheet - 304 grade, mirror polish.

• The Boiler and outer shell is provided with air insulation.

• Lid is made of die pressed Thick Stainless Steel plate & is equipped

with Pressure gauge, Steam release/Exhaust valve & spring loaded

safety valves & ¼” BSP Port fitted with coupling for validation purpose.

• Foot lifting arrangement for the lid.

• Fully Argon welded to avoid steam and pressure leakage.

• Heavy duty industrial flange heaters.

• Full sterilization cycle including Air purging, Sterilizing hold time, Cycle

end with release/exhaust of pressure & alarm is automatic.

• Microprocessor based Controller with time and temperature

programmable by user.

• Timer Range : 1- 99 Minutes.

• Temperature Sensor : PT-100.

• Low water level alarm with heater cut off.

• Perforated basket made of Stainless Steel sheet – 304 grade.

• Operates on 230 Volts AC Single phase 50 Hz.

• Screen mesh size range: from 4 mesh to 500 mesh.
• Timing range: 0~99min59s, time can be set from seconds to hours freely.
• Typically requires 50~150g of sample material.

• Intellectualized, auto-control, auto-test, auto-diagnose, auto-alarm.
• The circular water current pumped by magnetism pump can heat the system equally, and the bath liquid can achieve an even temperature.
• Temperature is high accurately auto-controlled.
• Auto stop at timing point.
• Parameters can be preset at any time, the preset and real data are displayed alternately in time.
• It has three vessels and three poles arranged on one line. The head part of the instrument can be artificially turned over smoothly and flexibly.
• Two disintegrations run synchronously. Auto stop at timing point.
• High accuracy is achieved in testing rotary speed and counting friability.
• The hardness has high accuracy press sensor and hardness data is displayed in Newton.
• It tests tablet hardness continuously. The tablet is loaded and pressed artificially.
• Auto-display, auto-memorize, auto-reset, auto-retest.

• All parts in contact with materials are made of high borosilicate glass and polytetrafluoroethylene.
• The main bracket is made of rust-proof aluminum alloy.
• Integrated condenser with upright double-layer serpentine coil to ensure high recovery rate.
• Rotation and heating power switch control.
• Large LCD screen can display temperature and rotation speed at the same time.
• Brushless rotating motor for smooth operation.
• Electronic stepless speed regulation, fine adjustment by turning the knob, simple and easy to operate.
• Rotating and heating double fuses have high safety protection performance.

• Speed adjustable. Gentle shaking, applied in different industries.
• LED display time and speed.
• Compact and clean designed, streamlined fuselage, simple operation, convenient for cleaning.
• Timing function. Beep alarm when operation ends.
• DC brushless motor, safe, long life and free of maintenance. Operating silent and stable.
• Different platforms to adapt different conical flasks and other sample containers for optional choices.

Recirculating Chiller is the ideal solution for precise temperature control in various industrial and laboratory applications. Designed for efficiency and reliability, this chiller provides a stable and consistent cooling source for your equipment. With a user-friendly interface, it allows for easy temperature adjustments and monitoring.

Motor power : 160W
Power supply : 220V/50/60Hz
Rotate speed : 5000 – 35000rpm
Weight : Approx. 1.0kg
Volume range : 0.2 – 300ml

1. LCD displays system status and parameters.

2. Stable and reliable operation with high quality switch.

3. Easy to operate with one touch knob.

4. Setup the time within 0~100 hours, instrument will make alarm voice when completing.

5. With power recovery, instrument will continue to run when power recovers from outage.

6. The mechanism of the incubator-heated base and cover

• LCD display
• AT KU-1 viscometer is specially applied to sample like paint, coating, etc.
• Central control circuit: 16 bit MCU.
• It can recyclingly show the units of KU, gm, and cP.

• Adopt DC brushless motor, stable operation and low noise.
• Can realize vacuum sample heating (optional).
• With over-temperature warning function.
• Adopt uniform heating method, fast heating, high temperature control accuracy, can heat the cavity to 60 ℃.
• Concentration time: 1min~99h59min, can be combined with cold trap.
• Low temperature concentration avoids sample loss, denaturation, activity loss, and oxidation. High throughput can process dozens of samples simultaneously without cross-contamination. The sample produced no foam and no loss. Safe and easy way to recover solvent from cold traps.