Athena Instruments Pvt. Ltd.

The products are used for sampling, carrying and storing Ethane, Ethylene, Propane, Propylene butadiene gas or any other gas and liquid product.

Model BPY’s sample cylinder allows gas samples to be collected at pressure, assuring that the sample constituents that can change state with pressure reduction are not lost during sample collection.

An example of this type of sample would be LPG or other two-phase fluids that could flash off sample constituents if the pressure was reduced.

• The product is conforming to SH/T0233 and ASTM D1265
• Which are made of seamless tubing and formed by utilizing the spinning process for consistent thickness, size, and capacity
• Smooth internal neck transition allows easy cleaning and eliminates trapped fluid
• Rupture disk units protect sampling cylinders from overpressurization by venting the extra content to the atmosphere
• Internal cylinder surface can be coated with PTFE to provide a nonstick surface

SS316 Oil Gas Transfer sampling Bottle

Other Details:

• Oil Sampling Cylinder
• LPG Sampling Bottle
• LPG Sampling Cylinder
• Transform Oil Sample Cylinder

Athena Industrial Gases manufacturers Oil/Gas sampling bottle are specially designed to collect and store high pressure Oil/Gas samples from the field & transport the same to laboratories. Procured from well-established manufacturers, these are made to undergo rigorous quality control tests to ensure high performance.

Features:

• Used to store oil/gas samples
• Ensure maximum integrity
• Effective corrosion resistance
• Available in different sizes and specifications
• Most competitive price

We manufacture quality gas/oil sampling bottles. The product & the Quality has received acceptance from most of the leading industrial establishments, Top level Research Origination, Laboratories, Refineries, mines, chemical Industries, Fertilizer, pharmaceutical Enterprises.

• Athena Gas/Oil Sampling Bottles are manufactured in S.S. 316/304 construction.
• Each bottle is tested to hydraulic test pressure of 250 bar.
• Suitable for working pressure of 150 bar.

Gas Sampling Bottle export Iraq, Iran, Oman, UAE, Dubai, Saudi Arebia, Korea, USA, Europe, Egypt, Israel, Turkey, Jordan, Kuwait, Yemen,

• Emission free sampling
• Available with Quick Connects
• All parts Stainless Steel
• Custom designs available

Test Method:
All samplers conform to ASTM D4057 (formerly ASTM D270), D6074 or ASTM D1265 specifications.

Features and Benefits:

• Two-valve type with 20% outage tube
• Built-in pressure relief valve
• Conforming to ASTM D1265 and GPA 2140 specification

This is a new non-leaking, pollution free sampler which is used for sampling for all kinds of toxic, corrosive, explosive and flammable samples under low pressure, high pressure or medium pressure from petrochemical process pipe.

  We can also design and manufacture sealed sampling device to meet special technical and safety requirements.

1. Sampler needle desgined to prevent blocking ,ensure spacer intact seal in leakage environment.

2. Separated location for sampler needle and emitting needle ensure reliable,save discharge channel for gas medium.

3. Sampler needle designed to directly demount and fix ensures easily and easily maintenance, unnecessary removal valve and pipe.

4. Purge function ensure sampler needle clean and representative sampling.

1. Samplers for low pressure liquid.

2. Samplers for rust and dangerous liquid.

3. Sampling pipe line or at the top of reactive tank on the condition of the low pressure.

Features:

• Used to store oil/gas samples
• Ensure maximum integrity
• Effective corrosion resistance
• Available in different sizes and specifications
• Most competitive prices
• Athena Gas/Oil Sampling Bottles are manufactured in S.S. 316/304 construction.
• Each bottle is tested to hydraulic test pressure of 250 bar.
• Suitable for working pressure of 150 bar.

Technical Specifications:

Athena LPG Vapor Pressure Test Bomb is conforming to ASTM D1267

Gauge Vapor Pressure of Liquefied Petroleum (LP) Gases (LP-Gas Method)> , ASTM D323, ISO

3007 and GB/T 6602.

Applicable for the determination of gauge vapor pressure of LPG at temperatures of 37.8 C up to and including a test temperature of 70 C. Composed of upper and lower chambers that can be connected to each other, Inlet Valve, Bleeder Valve, Straight-Through Valve and a pressure gauge(purchase yourself). Two chambers conform to the following requirements. To maintain the correct volume ratio between the upper and lower chambers, the units are not interchanged without recalibrating to ascertain that the volume ratio is within satisfactory limits.

    Upper Chambers: This chamber shown in photo, is a cylindrical vessel with the inner surfaces of the ends slightly sloped to provide complete drainage from either end when held in a vertical position. On one end of the chamber, a suitable bleeder valve coupling provided to receive the bleeder valve assembly and the pressure gauge. In the other end of the chamber an opening provided for coupling with the lower chamber.

    Bleeder Valve: The bleeder valve for purging the apparatus is a normal 1/4 in valve fitted into the side of the bleeder valve coupling. The lower end is threaded to fit into the end fitting of the upper chamber, and the upper end is threaded to receive the gauge coupling.

Athena LPG Vapor Pressure Test Bomb is conforming to ASTM D1267

Gauge Vapor Pressure of Liquefied Petroleum (LP) Gases (LP-Gas Method)> , ASTM D323, ISO

3007 and GB/T 6602.

Applicable for the determination of gauge vapor pressure of LPG at temperatures of 37.8 C up to and including a test temperature of 70 C. Composed of upper and lower chambers that can be connected to each other, Inlet Valve, Bleeder Valve, Straight-Through Valve and a pressure gauge(purchase yourself). Two chambers conform to the following requirements. To maintain the correct volume ratio between the upper and lower chambers, the units are not interchanged without recalibrating to ascertain that the volume ratio is within satisfactory limits.

Upper Chambers: This chamber shown in photo, is a cylindrical vessel with the inner surfaces of the ends slightly sloped to provide complete drainage from either end when held in a vertical position. On one end of the chamber, a suitable bleeder valve coupling provided to receive the bleeder valve assembly and the pressure gauge. In the other end of the chamber an opening provided for coupling with the lower chamber.

   Bleeder Valve: The bleeder valve for purging the apparatus is a normal 1/4 in valve fitted into the side of the bleeder valve coupling. The lower end is threaded to fit into the end fitting of the upper chamber, and the upper end is threaded to receive the gauge coupling.

   Lower Chambers: This chamber is a cylindrical vessel of such a volume that the ratio of the volume of the upper chamber to the volume of the lower chamber is between the limits. In one end of the lower chamber is provided to receive a suitable Staright-Through Valve. The other end of the chamber is equipped with a 1/4 in Inlet valve

Copper Strip Corrosion Test Cylinder for Lp Gases
ATHENA LPG Copper Strip Corrosion Test Cylinder isconforming to ASTM D1838 and ChineseSH/T 0232 standards. It is applicable for the detection ofpresence of components in liquefied petroleum gases which canbe corrosion to copper.

Corrosion Test Cylinder, constructed of stainless steel with an O-ringremovable top closure according to the dimensions given in drawing.The assembly has been tested for compliance with the minimumpressure rating of 2500 psi  by Hydrostatic testing.

Obtain a sample from a point in the LPG system that will give arepresentative sample of the volume being tested. Preferably,collect the sample directly into corrosion test cylinder after it hasbeen prepared for testing. Alternatively, collect a sample inaccordance with ASTM D1265 and D3700.

Material: Stainless steel

Capacity: 160ml

Working Pressure: 1000 psi (70 bar)

Structure: Composed of Cylinder and Needle valve.

Gas Sampling Bottle:

Athena Industrial Gases manufacturers gas sampling bottle and are specially designed to collect and store high pressure gas samples from the field & transport the same to laboratories. Procured from well-established manufacturers, these are made to undergo rigorous quality control tests to ensure high performance.

Features:

• Used to store gas samples
• Ensure maximum integrity
• Effective corrosion resistance
• Available in different sizes and specifications
• Most competitive price

We manufacture quality gas sampling bottles. The product & the Quality has received acceptance from most of the leading industrial establishments, Top level Research Originations, Laboratories, Refineries, mines, chemical Industries, Fertilizer, pharmaceutical Enterprises.

• Athena Gas Sampling Bottles are manufactured in S.S. 316 construction.
• Each bottle is tested to hydraulic test pressure of 250 bar.
• Suitable for working pressure of 150 bar.

Technical Specifications:

Body made of seamless tubing provides consistent wall thickness, size and capacity.

Smooth interinal neck transition allows easy cleaning.

Sizes from 10 to 3785 cm³ (1 gal).

Working pressure from 500 psig (34 bar) to 5000 psig (344 bar).

Materials: 304L, 316L and alloy 400.

LPG Miniature Stainless Steel Sample Cylinder:

1. Size From 10-3785 cube centi-meter(1 gal);

2.Working Pressures up to 5000 psig (344 bar);

3.304, 316/316L Stainless Steel

Product Details

Wanan Sample Cylinders

The sample cylinder is used for sampling, carrying and storing Ethane, Ethylene, Propane, Propylene butadiene gas or any other gas and liquid product.

Wanan sample cylinder allows gas samples to be collected at pressure, assuring that the sample constituents that can change state with pressure reduction are not lost during sample collection. 

An example of this type of sample would be LPG or other two-phase fluids that could flash off sample constituents if the pressure was reduced.

Capacity:  50 ml, 100 ml, 150 ml, 250 ml, 300 ml, 500ml, 1000 ml, 2000 ml, 2500 ml, 4000 ml, 5000 ml, 10000 ml.                                                                                                      
Working pressures up to 3000 psig(20Mpa;206bar)

Operation temperature: -40-50 centidegrees
Material: 304, 316,316L stainless steel

Liquid petroleum gas sample flow chart

The product comply with SH/T0233 and ASTM D1265.

Gas Sampling Bottle:

Athena Industrial Gases manufacturers gas sampling bottle and are specially designed to collect and store high pressure gas samples from the field & transport the same to laboratories. Procured from well-established manufacturers, these are made to undergo rigorous quality control tests to ensure high performance.

Features:

• Used to store gas samples
• Ensure maximum integrity
• Effective corrosion resistance
• Available in different sizes and specifications
• Most competitive price

We manufacture quality gas sampling bottles. The product & the Quality has received acceptance from most of the leading industrial establishments, Top level Research Originations, Laboratories, Refineries, mines, chemical Industries, Fertilizer, pharmaceutical Enterprises.

• Athena Gas Sampling Bottles are manufactured in S.S. 316 construction.
• Each bottle is tested to hydraulic test pressure of 250 bar.
• Suitable for working pressure of 150 bar.

Technical Specifications:

ATHENA LPG Copper Strip Corrosion Test Cylinder is conforming to ASTM D1838 and Chinese SH/T 0232 standards. It is applicable for the detection of presence of components in liquefied petroleum gases which can be corrosion to copper.

Obtain a sample from a point in the LPG system that will give a representative sample of the volume being tested. Preferably, collect the sample directly into corrosion test cylinder after it has been prepared for testing. Alternatively, collect a sample in accordance with ASTM D1265 and D3700.

Material: Stainless steel

Capacity: 160ml

Working Pressure: 1000 psi (70 bar)

Structure: Composed of Cylinder and Needle valve.